WALLBOX BE-W 1 SOCKET T2 7,4kW 205.W20-B0 Previous

Skip to the end of the images gallery

Skip to the beginning of the images gallery

WALLBOX BE-W 1 SOCKET+CABLE TYPE 2 3,7kW 205.W17-R0

Be the first to review this product

£2,500.00

In stock

SKU

205.W17-R0

Wall Box in Halogen-free engineering plastics, for wall assembly, equipped with a Type 2 connector, 1P+N+PE 16A 230 Vac 3.7 kW, with IPXXD protection in compliance with standard IEC/EN 62196-3 Suitable for electric vehicle charging in «mode 3» in compliance with standard EN61851-1. BASIC-FREE version ideal for domestic charging in total safety Exclusive design with «dual Feel Sensitive» finish, highly resistant to UV rays, high-level IP54 protection against dust and water with the possibility for personalisation. Including cable holder in anthracite technopolymer.

PROTECTION DEGREE IP	IP54
RATED CURRENT	16A
WORKING FREQUENCY	50/60Hz
RATED VOLTAGE	230V
POLES	1P+N+E
MOUNTING VERSION	SURFACE MOUNTING
MATERIAL	ENGINEERING PLASTIC
GLOW WIRE	GW 650°C
PROTECTION DEGREE IK	IK08
EV STANDARD	Type 2 1P+N+E 16A 230V~ 3,7kW
SYNTHETICAL DESCRIPTION	WALL BOX CABLE+SOCKET T2
WITH INTEGRATED CABLE	Type 2
WORKING TEMPERATURE	-30°C/+50°C
COLOUR	ANTHRACITE
COMMERCIAL SERIES	BE-W Series
DIMENSIONS	235x370x115mm

Payment options from Paypay, Visa, Mastercard, Klarna just to name a few....

Pay 3 installments of @@@ over 60 days. No interest. No fees.

1st Payment

@@@

30 Days later

@@@

60 Days later

@@@

free shipping

Hassle Free Returns

More Information

More Information
Manufacturer	Scame
Color	Black

Write Your Own Review

Date Picker

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

Domestic Installation

Standard Installation £0.00

( Including Electric Vehicle Homecharge Scheme Government Contribution )

Up to 15 metres of cabling run externally
Connection at your consumer unit or meter position
Fitting of Surge protection where required
Fitting of current limiting clamp and wiring upto 15 metres between charge point and meter, additional accessories to charge point required in some cases
Fitting of cable holders/cradles if applicable
Connection and commissioning via local WiFi network
Test and inspection of the installation

We will fully install and commission your single phase charger upto 7.4Kw to include the running of a cable fixed on the outside of your property upto 15 metres at a maximum height of 2.8 metres, the fitting of a separate consumer unit within your property or external meter box (unless existing consumer unit allows for direct connection), the fitting and connection of your charge point to a wall and accessories where applicable,the fitting of an functional isolation switch, the fitting of a surge suppressor where risk assessment calculations deems it advisable to protect the system from transient over voltage of atmospheric origins,connection and set up of current transformer clamp to monitor Installation loading, electrical installation test and inspection of the work carried out, commissioning and demonstration of the charge point,claim of the grant on your behalf, electronic copies of test certification and building control notice, notification to your distribution network operator.Please note where required main equipotential earth bonding must be fitted, the electricity supply & meter must meet minimum required standards, any extraneous metalwork within touching distance of your EV parking space must be insulated or terminated to the same earthing system as the charge point, steady WiFi signal is required at the charge point location to -68dBm or superior, please ensure charge point has curtailment option or you have purchased management device where needed *90% of installs will require load management. Any additional required work can be discussed on site and a free estimate supplied valid for 90 days.

If on your day of installation Incorrect or False claims of OZEV eligibility are discovered it will incur a cost of £100 and works will cease or be cancelled.
An appropriate adult must be present on the day of the installation to enable commissioning, access to the property and demonstration of the charge point.
If additional work is required outside of our standard scope of works it will either be carried out by our engineer on site at an hourly rate of £40 (Exclusive of materials & time permitting).
Alternatively if additional work is deemed too much to be carried out on the day it will be discussed and an estimate provided valid for 90 days. (Our engineers will always consult with you prior to any additional work and seek confirmation from you)

WALLBOX BE-W 1 SOCKET+CABLE TYPE 2 3,7kW 205.W17-R0

For Installation

Click Here

@@@

@@@

@@@

Free UK Delivery Same Day Dispatch

Date Picker

Date Picker

Domestic Installation

Domestic or commercial

Domestic Government Grant

AM I ELIGIBLE FOR THE OZEV GRANT SCHEME?

Commercial Government Grant

Qualifying OZEV Grants

Service Plan

Booking Date