DrayTek Vigor 2762ac Wireless Router (802.11ac) Previous DrayTek Vigor 2762ac Wireless Router (802.11ac)

DrayTek Vigor 2762n Wireless Router (802.11n)

£140.33
In stock
Only 764 left
SKU
CMS212518
Part number:212518
Manufacturer product ID:V2762N-K
Manufacturer:DrayTek
Weight (Kg):1.15
Warranty period:24 Months
EAN Code:EAN4712909126090
free shipping
Hassle Free Returns
Key Features
  • Supports VDSL2, ADSL, 3G/4G and Ethernet-based Broadband
  • Ethernet WAN (for cable modems etc.)
  • 3G/4G USB Modem Support as primary or backup/failure
  • IPv4/IPv6 Dual-Stack
  • Four Gigabit LAN Ethernet Ports

The Vigor 2762 is an ADSL/VDSL2, Ethernet or 3G/4G router, that's ideal for your small office or home business/office. It provides connectivity to your PCs or other Internet-connected devices (laptops, tablets, games consoles, smartphones) via its 4 built-in Gigabit Ethernet ports, or using Wireless LAN (on 'n' & 'ac' models).

The firewall helps protect your network from external threats, as well as the Vigor2762's built-in Content Filtering which gives you control over what and when your local users can access or download. The Vigor 2762 series can alternatively connect to an Ethernet Internet connection, such as a cable/fiber modem (e.g. Virgin Media) instead of connecting to a ADSL/VDSL line.   Compatible 3G & 4G (LTE) modems can also optionally be added to the USB port to provide backup or main Internet connectivity without any fixed line.

The DrayTek Vigor 2762ac adds 802.11ac Dual-Band Wireless to your network, with up to 866Mbps on the 5GHz 11ac band, and up to 300Mbps on the 2.4GHz band, allowing devices access to the Internet from around the property. The Vigor 2762ac operates simultaneiously in both the 2.4Ghz and less congested 5Ghz band so your devices can connect to either, with Band Steering to ensure that each wireless device connecting is guided to its most suitable wireless band.

The Vigor 2762Vac variant integrates a VoIP ATA (Analogue Telephone Adapter), which provides two analogue phone ports to provide VoIP integration via the Internet (VoIP). You can connect 1 or 2 regular telephones, which can be used independently and simultaneously for both incoming and outgoing calls.

An Ideal firewall router for Fibre Broadband

Many broadband connections offered by ISPs are referred  to  as  Fibre Broadband, although technically in many cases they're  actually VDSL based connections which  run  over  your phone line. The phone line's twisted pair telephone cable runs from the premise to a street cabinet  (these  are  typically 4ft green boxes with a Openreach logo on) which contain a VDSL MSAN (multi-service access node) that connects to fibre infrastructure which runs to the local exchange and then on to the ISPs core network. The Vigor 2762's built-in DSL interface (WAN1) is ideal for connecting this type of VDSL based connection.

Cable Modem and Ethernet WAN Compatible

As well as being able to connect to ADSL/VDSL lines directly through the Vigor 2762's RJ11 'DSL' socket the Vigor 2762 series can instead connect to Ethernet-fed Internet connections such as that provided by cable modems (e.g. VirginMedia).  When Ethernet WAN is enabled LAN Port 4 switches to become your WAN port into which you can connect to your cable modem or other Ethernet feed. 

The other 3 Gigabit LAN ports (1-3) remain available for normal LAN connectivity.  Note you cannot have Ethernet WAN and ADSL/VDSL enabled at the same time; if Ethernet WAN is enabled the ADSL/VDSL port is disabled (and vice versa).   The photo on the right shows the Vigor 2762 connected to a fiber modem using the Ethernet WAN Port. 

IPv6 - Next Generation Internet Routing

The Vigor 2762 supports IPv6 - the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported directly from your own ISP but if your ISP does not (yet) support IPv6 the Vigor 2762 also supports IPv6 broker/tunnel services to provide IPv6 access using either TSPC or AICCU via 3rd party IPv6 providers.

The advanced networking features of the Vigor 2762 such as the object-based Firewall Quality of Service Content Filtering and VLANs support both IPv4 and IPv6 networks.

Specifications

  • Physical Interfaces:
    • LAN Ports (Switch):
      • 4 X Gigabit Ethernet (1000Mb/s) Ports
        LAN Port 4 Switchable with WAN2
    • WAN Ports:
      • WAN1 : ADSL/VDSL RJ11
      • WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet
      • WAN3 : 3G/4G Modem (not supplied) via USB 2.0 Port
  • Performance:
    • Firewall: Up to 300Mb/s max
    • IPSec VPN: Up to 60Mb/s max
    • NAT Sessions: 50000
  • Wireless LAN Features ('n' and 'ac' Models Only):
    • 802.11g/b/n and 802.11ac (Vigor 2762ac only)
    • Backward Compatibility for 802.11b/g
    • Wireless Features on Vigor 2762ac:
      • 802.11a
      • 802.11ac (5Ghz)
      • 2x2 SU-Mimo (5Ghz)
      • Up to 2 Spatial Streams
      • 866Mb/s Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
      • Dual-band (2.4/5Ghz) simultaneous wireless
      • Extended DFS frequency range
    • Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
    • Switchable Hidden SSID
    • Restricted access list for clients (by MAC address)
    • Time Scheduling (WLAN radio can be disabled at certain times of day)
    • Time Scheduling for individual SSIDs NEW!
    • Active Client list in Web Interface
    • Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
    • Station Control limit wireless client access time per day
    • Wireless Rate-Control
    • Airtime Fairness NEW!
    • Band Steering NEW!
    • Wireless Router-assisted Client Mobility NEW!
    • 64/128-bit WEP Encryption
    • WPA/WPA2 Encryption
    • Packet Aggregation and Channel Bonding
    • Access Point Discovery
    • WDS (Wireless Distribution system) for WLAN Bridging and Repeating
    • Wireless LAN On/Off button
    • 802.11e WMM (Wi-Fi Multimedia)
    • Optional Higher Gain or directional aerials available.
  • Firewall & Security Features:
    • CSM (Content Security Management):
      • URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
      • Block Web sites by category (e.g. Adult Gambling etc. Subject to subscription)
      • Prevent accessing of web sites by using their direct IP address (thus URLs only)
      • Blocking automatic download of Java applets and ActiveX controls
      • Blocking of web site cookies
      • Block http downloads of file types :
        • Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
        • Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
        • Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
      • Time Schedules for enabling/disabling the restrictions
      • Block popular P2P (Peer-to-Peer) file sharing programs
      • Block Instant Messaging programs (e.g. IRC Skype/Yahoo Messenger etc.)
    • DNS Filter: Use DNS to enforce categorisation
    • DMZ Host
    • 40 Port Redirection rules
    • 40 Open Port rules (10 port ranges per rule)
    • Policy-Based Firewall
    • MAC Address Filter
    • SPI ( Stateful Packet Inspection ) with FlowTrack Mechanism
    • DoS / DDoS Protection
    • IP Address Anti-spoofing
    • E-Mail Alert and Logging via Syslog
    • Bind IP to MAC Address
  • Bandwidth Management:
    • Temporary (5 minute) Quick Blocking of any LAN Client
    • Bandwidth Limit (Shared or individual limit)
    • Smart Bandwidth Limitation (Triggered by Traffic / Session)
    • Session Limit
  • Quality of Service (QoS)
    • Guaranteed Bandwidth for VoIP
    • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
    • Layer 2&3 (802.1p & TOS/DCSP)
    • DiffServ Code Point Classifying
    • 4-level Priority for each Direction (Inbound / Outbound)
    • Bandwidth Borrowing
    • App QoS: Classify traffic by Application NEW!
    • Automatic prioritisation of SIP/RTP Voice over IP (VoIP)
  • LAN-to-LAN Dial-Out VPN Facilities:
    • 2 Concurrent active VPN Tunnels
    • Tunnelling Protocols:
      • PPTP
      • IPSec
      • L2TP
      • L2TP over IPSec
      • DrayTek SSL
    • IPSec Features:
      • Internet Key Exchange : IKEv1 (Main and Aggressive mode) & IKEv2 NEW!
      • Security Protocols : AH mode ESP mode
      • DiffieHelman (DH) Groups:
        • IKEv1 : 12514
        • IKEv2 : 12514192021
      • Encryption:
        • DES / 3DES (168bits)
        • AES (128/192/256bits) - Hardware-Accelerated
      • Authentication - Hardware-Accelerated:
        • MD5
        • SHA-1
        • SHA-256
      • IKE Authentication : Pre-shared Key or X.509 Digital Signature
      • DHCP over IPSec
      • NAT-Traversal (NAT-T)
      • Dead Peer Detection (DPD)
      • Virtual IP Mapping map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
      • VPN Pass-Through
  • Teleworker Dial-In SSL VPN Facilities:
    • 2 Concurrent active VPN Tunnels
    • Tunnelling Protocols:
      • DrayTek SSL
    • MOTP (Mobile One Time Password) for two factor authentication (2FA)
    • Free DrayTek Smart VPN Client software available for Windows Android macOS & iOS
  • Network Features:
    • 2 LAN (IPv4 & IPv6) Subnets
    • LAN Clients : Up to 253 per subnet
    • Multi Subnet DHCP Servers with DHCP Relay
    • Port-Based VLAN (Inclusive/Exclusive Groups)
    • 802.1q VLAN Tagging NEW!
    • Custom DHCP Option support
    • Port Mirroring
    • Dynamic DNS
    • DNSSEC support NEW!
    • DNS Transparent Proxy
    • DNS Caching
    • LAN DNS (supports CNAME)
    • NTP Client (Synchronise Router Time)
    • Microsoft™ UPnP Support
    • Maximum MTU 1534
  • Network/Router Management:
    • Web-Based User Interface (HTTP / HTTPS)
    • CLI ( Command Line Interface ) / Telnet / SSH
    • Web Console: Access CLI through Web Interface
    • Administration Access Control
    • Configuration Backup / Restore
    • Configuration Import from Vigor 2760
    • Built-in Diagnostic Function
    • Firmware Upgrade via Web Interface TFTP VigorACS
    • Logging via Syslog
    • SNMP v2 & v3 Management with MIB-II
    • TR-069
    • TR-104
    • Access Point Management: Centrally Manage 2 DrayTek VigorAP wireless access points NEW!
  • WAN Failover Features:
    • WAN Connection Fail-over
    • WAN1 PPPoE/PPPoA Fallback account used if the primary details are unable to establish a working connection NEW!
    • WAN Budget - gives notification or switches to failover WAN interface if data usage quota exceeded NEW!
  • WAN Protocols:
    • DHCP Client
    • Static IP
    • PPPoE
    • PPTP/L2TP (Ethernet WAN only)
  • ADSL & VDSL Compatibility:
    • BT Infinity Option 1 & Option 2 Compatible
    • BT SIN 498 MCT Approved
    • Support for G.INP & Vectoring
    • ADSL Standards:
      • ANSI T1.413 Issue2
      • ITU-T G.992.1 G.dmt (ADSL)
      • ITU-T G.992.2 G.lite
      • ITU-T G.992.3 ADSL2
      • ITU-T G.992.5 ADSL2+
      • Annex L (READSL)
      • Annex A
      • Annex M
      • ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
      • DSL Forum : TR-048/67 & TR-100
    • VDSL Standards:
      • ITU-T VDSL2 G.993.2
      • ITU-T G.993.1 G.997.1
      • Band Plan: G.998 G.997
      • Annex A Annex B Annex C
      • VDSL2 Profile: 8a 8b 8c 8d 12a 12b 17a 30a
      • OLR UPBO DPBO Supported
      • US0 Supported
      • Loop Diagnostic Mode
      • DSL Forum WT-114
    • ATM Protocols:
      • RFC-2684/RFC-1483 Multiple Protocol over AAL5
      • RFC-2516 PPP over Ethernet
      • RFC-2364 PPP over AAL5
      • PPPoE pass through LAN/WLAN
      • PPPoE/PPPoA Relay
      • Transparent bridge for MPoA
      • Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
      • Support for RFC4638 for MTU up to 1500
  • Operating Requirements:
    • Wall Mountable
    • Operating Temperature : 0°C ~ 45°C
    • Storage Temperature : -25°C ~ 70°C
    • Humidity 10% ~ 90% (non-condensing)
    • Power Consumption: 24 Watt Max.
    • Dimensions:
      • Length: 207mm
      • Width: 131mm
      • Height: 39mm
    • Weight: 440g (without antenna)
    • Operating Power: DC 12V (via external PSU supplied)
    • Warranty : Two (2) Years RTB
    • Power Requirements : 220-240VAC

"

RETURNS

If you need to return a product purchased from Thurgo please download and print the returns from below. It is important to return your product with the form attached to ensure that your return is not delayed upon receipt in our warehouse. Before returning any product, email admin@thurgo.co.uk for a RMA number, we will respond via email with you RMA number and any return instructions.  Postage fees for any returns are your responsibility.

Returns Form Click here to download

Please do not post anything back without an RMA number as this may delay processing of your return.


Up to 14 Days After Purchase

Under the new distance selling regulations you have the right to cancel this contract with Thurgo and return your goods for a refund within 14 working days, from the day after you receive the goods.

It is the customer’s statutory duty to take reasonable care of the goods whilst in their possession. Therefore, we recommend the goods are returned ‘with’ the original packing in good condition to avoid the products being damaged on their return journey as it is the customer’s responsibility to take care of the goods during the cancellation period.

Please note it is the consumers responsibility to pay for return postage to Thurgo when the goods are not faulty.

You can request to return goods after 14 Days with a restocking fee - however this is at the discretion of our Customer Services team.

A refund for the goods will be made by the same payment method and to the same card that was used to make the purchase. All refunds will be undertaken within 30 days of cancellation.

Please note credit/debit card refund can take 4 working days to clear.

Non faulty goods must be returned at the customers own cost within this period.


Faulty Goods

If you discover your purchase to be faulty within 30 calendar days of purchase please contact us by email Customer services: admin@thurgo.co.uk

All Items sold via Thurgo have a one years manufacturers warranty.

With some products the manufacturers would require the customer to contact them directly. In these cases, manufacturers provide a specialist full on-site service and/or telephone help facilities for your convenience which we recommend you use in order to correct the fault quickly.

Any goods returned faulty ( within 28 calendar days in original packaging) will be repaired or replaced and sent back to the customer carriage free.

Please note that due to hygiene reasons opened headphones cannot be returned unless faulty.

Any goods returned for credit which are not found to be faulty will be returned to the customer with a minimum £10 carriage and administration charge. You must return the complete package, including accessories to us. Any items that are missing, when the product is returned to us will also be charged for - However this is at the discretion of our Customer Services team.

Title to and risk of loss in your Products will pass to you on delivery of the Products to the address stated in your Order Confirmation.


Product Boxes

We understand that boxes need to be opened to inspect the products, however if you do return the items to us, we need to resell them. WE CANNOT REFUND ON SERIOUSLY DAMAGED product boxes that prevent us from reselling the item. Please ensure that you DO NOT WRITE ON ITEM BOXES and DO NOT USE EXCESSIVE TAPE such as duct tape or heavy duty sealing tape.

To Top