CTEK CHARGESTORM® CONNECTED 910-17062 Previous

Skip to the end of the images gallery

Skip to the beginning of the images gallery

CTEK CHARGESTORM® CONNECTED 910-17063

Be the first to review this product

£2,284.80

In stock

SKU

910-17063

Description EV-charger, dual outlets CHARGESTORM® CONNECTED 2 is a state of the art EV charger specifically designed to be safe and easy to use. It’s ideal for home, business, public parking and tenant-owner housing associations, and it meets all the required technical safety standards. An Ethernet cable connects the EV charger to the internet. If Ethernet cannot be used, the unit can also be supplied with an optional 3G/4G modem. Internet connection is required for portal services and app management. We support integration with all major operators in electric car charging. Features Charging power 1.4–7.4 kW Adjustable charging power via app or software NanoGrid™ dynamic load balancing support Built-in fuse, AC and DC ground fault detection, built-in energy meter Easy installation and lock protected for maintenance Wall or pole mounted Ambient operating temperature from -30 °C to +50 °C RFID reader OCPP 1.5/1.6 IP54 and IK10 2-year warranty

Payment options from Paypay, Visa, Mastercard, Klarna just to name a few....

Pay 3 installments of @@@ over 60 days. No interest. No fees.

1st Payment

@@@

30 Days later

@@@

60 Days later

@@@

free shipping

Hassle Free Returns

Details

Version	2
Charging category	AC charging
Ambient storage temperature	-30 °C to +50 °C
Ambient operating temperature	-30 °C to +50 °C
Altitude	< 2000 m
Charging station connector	Type 2
Locking actuator (type 2 outlet)	Yes
Charging current	6–32 A
Outlet	Dual type 2 outlets
Authentication	RFID, APP
Load balancing	Load balancing (NANOGRID™ Internal) is included between the dual outlets of the EV charger. Options for other load balancing solutions between several units (NANOGRID™ Home, NANOGRID™ Local, NANOGRID™ CTEK Grid Central).
Number of phases	1 Phase
Communication protocol	OCPP 1.5; OCPP 1.6
Charging power	1.4–7.4 kW
Approval	Download the Declaration of Conformity from www.ctekemobility.com
Energy meter	MID (standard)
Power input connector	16 mm2 terminal block
Frequency	50 Hz
Connectivity	3G; 4G; Ethernet
Compatibility mains	IT-net, TN-net
Enclosure color	Black; Green
Relative humidity	Up to 100% at 25 °C
Enclosure color (plastic)	Black
Enclosure color (metal)	Green
Compliance	CE; IEC 62196-2; IEC 61851-1; IEC 61439-7
Enclosure material	Plastic; Metal
Enclosure lock	Key
Rated voltage (Input)	230 V
Ground fault detection	Built-in ground fault detection, 30 mA AC, 6 mA DC
Ground fault reset	Semi-automatic
RFID reader	Yes
RFID tag standard	ISO15693, ISO14443A (MIFARE)
Degree of protection	IP54
Impact protection	IK10
Enclosure dimensions (H x W x D)	449 x 282 x 160 mm
App support	Smartphone display; Taking Charge App for Android and IOS (requires that the EV charger is connected to the cloud service Charge portal)
User interface	LED symbols
Disclaimer	All products and product specifications are subject to change without notice, to improve reliability, function or design. In the event of product error, we reserve the right to inspect the product and verify the fault. All product returns are subject to our standard warranty terms.
Weight	~ 24 kg
Packaging size (L x W x H)	515 x 235 x 420
Warranty	2 years
Warranty, info	Limited Warranty

More Information

More Information
Manufacturer	CTEK

Write Your Own Review

Date Picker

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

Domestic Installation

Standard Installation £0.00

( Including Electric Vehicle Homecharge Scheme Government Contribution )

Up to 15 metres of cabling run externally
Connection at your consumer unit or meter position
Fitting of Surge protection where required
Fitting of current limiting clamp and wiring upto 15 metres between charge point and meter, additional accessories to charge point required in some cases
Fitting of cable holders/cradles if applicable
Connection and commissioning via local WiFi network
Test and inspection of the installation

We will fully install and commission your single phase charger upto 7.4Kw to include the running of a cable fixed on the outside of your property upto 15 metres at a maximum height of 2.8 metres, the fitting of a separate consumer unit within your property or external meter box (unless existing consumer unit allows for direct connection), the fitting and connection of your charge point to a wall and accessories where applicable,the fitting of an functional isolation switch, the fitting of a surge suppressor where risk assessment calculations deems it advisable to protect the system from transient over voltage of atmospheric origins,connection and set up of current transformer clamp to monitor Installation loading, electrical installation test and inspection of the work carried out, commissioning and demonstration of the charge point,claim of the grant on your behalf, electronic copies of test certification and building control notice, notification to your distribution network operator.Please note where required main equipotential earth bonding must be fitted, the electricity supply & meter must meet minimum required standards, any extraneous metalwork within touching distance of your EV parking space must be insulated or terminated to the same earthing system as the charge point, steady WiFi signal is required at the charge point location to -68dBm or superior, please ensure charge point has curtailment option or you have purchased management device where needed *90% of installs will require load management. Any additional required work can be discussed on site and a free estimate supplied valid for 90 days.

If on your day of installation Incorrect or False claims of OZEV eligibility are discovered it will incur a cost of £100 and works will cease or be cancelled.
An appropriate adult must be present on the day of the installation to enable commissioning, access to the property and demonstration of the charge point.
If additional work is required outside of our standard scope of works it will either be carried out by our engineer on site at an hourly rate of £40 (Exclusive of materials & time permitting).
Alternatively if additional work is deemed too much to be carried out on the day it will be discussed and an estimate provided valid for 90 days. (Our engineers will always consult with you prior to any additional work and seek confirmation from you)

CTEK CHARGESTORM® CONNECTED 910-17063

For Installation

Click Here

@@@

@@@

@@@

Free UK Delivery Same Day Dispatch

Date Picker

Date Picker

Domestic Installation

Domestic or commercial

Domestic Government Grant

AM I ELIGIBLE FOR THE OZEV GRANT SCHEME?

Commercial Government Grant

Qualifying OZEV Grants

Service Plan

Booking Date